1. Excessive temperature will change the appearance of pu artificial leather and stick to each other. It should not be placed near the stove, nor beside the radiator, and should not be exposed to direct sunlight.
2. Do not place furniture in a room with too low temperature. If the temperature is too low or the cold air is blown directly for a long time, the artificial leather will be frozen, cracked and hardened.
3. Furniture should not be placed in a space with high humidity. Excessive humidity will cause the hydrolysis of synthetic leather to occur and develop, causing damage to the surface film and shortening the service life. Therefore, rooms such as toilets, bathrooms, kitchens, etc. are not suitable
4. When wiping artificial leather, do not use a wet towel or a damp cloth. Generally, it is better to use a dry cloth.
5. Synthetic leather is made of nylon, polyester, polypropylene and other synthetic fibers through the processes of laying, acupuncture, bonding, and plastic coating. It not only has good wear resistance and good mechanical strength, but also has elasticity. , is equally soft at room temperature and low temperature. Since it is made of synthetic materials, it is not afraid of insects, not easy to mold, and does not need to be oiled, and the surface has good water resistance. But synthetic leather is not resistant to high temperature and chemical erosion.
6. When wearing synthetic leather clothing, be careful not to rub or collide with hard and rough objects, so as not to damage the surface coating. The synthetic leather coating film is relatively thin, so it should not be baked near the stove or heater to prevent the leather surface from being damaged, and it should not be contaminated with corrosive chemicals such as acid and alkali. When washing, do not use hot water, because hot water will damage the fibrous tissue of the base fabric. It can't be washed with gasoline. Generally, it can be wiped with a soft cloth dipped in soapy water, then washed with warm water. After washing, hang it in a shaded and ventilated place to dry, and must not be exposed to the sun. After drying, it should be placed in a dry and cool place, do not fold, and do not put heavy objects on it.
For more product information, you can click here: PU notebook factory.
